- Home
- Product Detail
MOBILE MILKING MASTER FOR COWS
Product Details
MOBILE MILKING MASTER FOR COWS
1. BEFORE STARTING THE MILKING PROCESS:
- Place the pipe hook into the cooling tank hole
- Install a new filter
- Make sure that the butterfly valves are OFF while milking
- Make sure that the drain valve is OFF as well
- Turn OFF the clusters & shut OFF the cluster valves
- Remove the cluster of the washing cups
2. HOW TO OPERATE THE MACHINE
- Plug the machine to grounding
- Turn ON the main SWITCH
- Check the VACUUM level through the vacuum meter
- Make sure there is no VACUUM leak anywhere
- The VACUUM level must be between 42-46 KPA
- You can always adjust the vacuum level on the regulator.
3. HOW TO START THE MILKING PROCESS:
- Take the first cluster to place on the teats
- Turn ON the shut OFF valve and place the teat
- Then continue the same process with each cluster
- When the milk flow decreases remove the clusters
- After the last milking, turn OFF the main SWITCH
- To discharge the milk from the receiver, PRESS on the MANUAL BUTTON
- Turn ON the drain valve to discharge the remaining milk, then turn it OFF again
- Unplug the machine.